تفاصيل المنتج:
شروط الدفع والشحن:
|
end connection:: | Flange connect | Design pressure.: | PN10 , 16 |
---|---|---|---|
Filter mesh size.: | as your requirement | Design specific fluid gravity.: | Design specific fluid gravity. |
Body: | Stainless steel | Filter/ Screen: | SS 304 / SS 316 / Stainless steel |
Size: | DN 15~ DN300 | Medium: | Water, Oil, Gas Etc., |
تسليط الضوء: | pipeline strainers,industrial water strainers,industrial water strainers |
1/4'' Perforated Holes Conical Or Basket Type strainer Mounting Between Two Flanges
Brief introduction:
The strainer may be used on all types of pipelines to collect granulated foreign substances and
contaminants collected.
It can improve the clearance in the medium, and prolong the life of valves and other equipments.
It is suitable for wafer, petroleum and steam.
FEATURES
• Iron strainers are complete with Flat Face (Series 125YF) or Raised Face (Series 250YF)
flanges in accordance with ASME B16.1.
• Strainer body meets applicable ASME Standard.
• One piece cast body.
• Strainers equipped with bolted cover flange that utilize a flat gasket seal.
• Low pressure drop.
• Upper and lower machined seats.
• 304 SS perforated screens are standard.
• Drain/Blow-off connection furnished with plug as standard.
• Generous screen area and properly proportioned straining chamber to minimize initial pressure
drop while maximizing time between cleanings.
• Compact end to end dimension.
Mail part & material
Body: gray cast iron, cast iron, ductile iron
Filter: stainless steel
O-ring: NBR
Technical Specification
- Nominal diameter:65~500mm
- Nominal pressure:1.0/1.6/2.5Mpa
STRAINER INSTALLATION INSTRUCTIONS
A . Ensure all machined surfaces are free of defects and that the inside of the
strainer is free of foreign objects.
B . For horizontal pipelines, the strainer should be installed so that the drain
connection is pointed downwards.
C . For flanged end strainers, the flange bolting should be tightened gradually in
a back and forth clockwise motion.
D . Once installed, increase line pressure gradually and check for leakage around joints
E . If the strainer is supplied with a start-up screen, monitor pressure drop carefully.
SIZE | INCH | 2 | 2½ | 3 | 4 | 5 | 6 | 8 | 10 | 12 | 14 | 16 | 18 |
MM | 50 | 65 | 80 | 100 | 130 | 150 | 200 | 250 | 300 | 350 | 400 | 450 | |
A | INCH | 7.875 | 10 | 10.125 | 12.125 | 15.625 | 18.5 | 21.625 | 25.75 | 30 | 33.25 | 38.75 | 43.12 |
MM | 200 | 254 | 257 | 308 | 397 | 470 | 549 | 654 | 759 | 846 | 984 | 1095 | |
B | INCH | 5.25 | 6.5 | 7.5 | 9 | 13.125 | 15.75 | 18 | 18.5 | 22 | 28.625 | 30 | 31 |
MM | 133 | 165 | 190 | 227 | 335 | 401 | 457 | 471 | 557 | 727 | 762 | 788 | |
C | INCH | 2 | 2.5 | 3 | 4 | 5 | 6 | 8 | 10 | 12 | 14 | 16 | 18 |
MM | 51 | 65 | 76 | 102 | 127 | 152 | 203 | 254 | 305 | 356 | 406 | 457 | |
Weight | kgs | 13 | 16 | 21 | 30 | 43 | 60 | 90 | 140 | 175 | 392 | 627 | 1032 |
اتصل شخص: Mr. Steve
الهاتف :: +8613818096733
Iron coating EPDM or NBR Resilient seated Gate Valve PN16 600mm
لينة ختم / مقعد مطاطي ويدج مرونة يجلس بوابة صمام كامل تتحمل
لينة الوتد يجلس 10 بوصة بوابة صمام مع المغزل SS316 للمواد الكيميائية
خفيفة الوزن شفة نهاية المرنة يجلس بوابة صمام DIN F4 / Ductile الحديد بوابة الصمامات
أزرق WCB / WC6 يلقي الصلب بوابة صمام لمحطة الطاقة / بعقب اللحام بوابة صمام
شفة مزورة الصلب بوابة صمام درجة الحرارة العالية ، صمام بوابة الخيوط
2 "صمام مأخذ اللحام الفولاذي المصبوب SW / صمام بوابة بونيت الملحومة
1/4'' Perforated Holes Conical Or Basket Type strainer Mounting Between Two Flanges
المصبوب الصلب A216 WCB Y نوع مصفاة مع تصفية SS304 ، JIS 20K شفة النهاية
حديد الدكتايل GGG40 قابل للتعديل مصفاة عداد المياه مع تمديد الأنابيب للرقائق
OEM متر مصفاة المياه DN50 ~ DN200 ، تصفية الحجم 20/40/60/80 شبكة